Linux kernel 2.4.37.11 rebuild on 486 (2)

Booting up, dmseg and startx

Linux version 2.4.37.11 (root@dialog:) (gcc version 3.4.6) #2 Wed Sep 11 12:44:15 EEST 2019
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000001000000 (usable)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
16MB LOWMEM available.
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
DMI not present.
Kernel command line: BOOT_IMAGE=Linux-2.4.37.11 ro root=301
Initializing CPU#0
Console: colour VGA+ 80x25
Calibrating delay loop... 59.80 BogoMIPS
Memory: 13580k/16384k available (1449k kernel code, 2420k reserved, 478k data, 80k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
CPU:     After generic, caps: 00000001 00000000 00000000 00000000
CPU:             Common caps: 00000001 00000000 00000000 00000000
CPU: AMD 486 DX/4-WB stepping 04
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xfc020, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
isapnp: Scanning for PnP cards...
isapnp: Card 'D-Link DE-220P PnP ISA Card'
isapnp: Card 'ESS ES1868 Plug and Play AudioDrive'
isapnp: 2 Plug & Play cards detected total
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10f
Floppy drive(s): fd0 is 1.2M, fd1 is 1.44M
FDC 0 is an 8272A
ne.c: ISAPnP reports Generic PNP at i/o 0x240, irq 5.
ne.c:v1.10 9/23/94 Donald Becker (becker@scyld.com)
Last modified Nov 1, 2000 by Paul Gortmaker
NE*000 ethercard probe at 0x240: 00 80 c8 f0 00 9a
eth0: NE2000 found at 0x240, using IRQ 5.
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: FUJITSU MPB3032ATU, ATA DISK drive
hdc: SAMSUNG MP0402H, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: 6335280 sectors (3244 MB), CHS=785/128/63
hdc: attached ide-disk driver.
hdc: host protected area => 1
hdc: 78242976 sectors (40060 MB) w/8192KiB Cache, CHS=4870/255/63
Partition check:
 hda: hda1 hda2
 hdc: hdc1
ide: late registration of driver.
hdh: _NEC CD-RW NR-9300A, ATAPI CD/DVD-ROM drive
ide3 at 0x168-0x16f,0x36e on irq 12
hdh: attached ide-cdrom driver.
hdh: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.12
ide3: ESS ES1868 Plug and Play AudioDrive IDE interface
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 80k freed
Adding Swap: 32252k swap-space (priority -1)