Kolasait: October 2019

Sunday, October 13, 2019

Memory upgrade

Added another 16MB RAM. Two 8 MB SIMMs.

Only way now to add more is to use 16MB memory sticks.

Thursday, October 10, 2019

AbiWord 2.0.14 (1)

Latest version is 3.0.2 from 2016

Gitlab has newer version but it needs gtk+3.
https://gitlab.gnome.org/World/AbiWord/commits/master

System Requirements

GTK+ 2.12 or newer
At least 16MB RAM (embedded systems probably won't require more than 8)

https://www.abisource.com/support/require/

Needs fribidi-0.10.9. Built it.
I will use 2.0.14 version of AbiWord.

Download

wget https://www.abisource.com/downloads/abiword/2.0.14/source/abiword-2.0.14.tar.gz

Build time: 22 hours.

ldd AbiWord-2.0

libglade-2.0.so.0 => /usr/lib/libglade-2.0.so.0 (0x40020000)
libgtk-x11-2.0.so.0 => /usr/lib/libgtk-x11-2.0.so.0 (0x40036000)
libxml2.so.2 => /usr/lib/libxml2.so.2 (0x402fb000)
libpthread.so.0 => /lib/libpthread.so.0 (0x40402000)
libz.so.1 => /lib/libz.so.1 (0x40454000)
libgdk-x11-2.0.so.0 => /usr/lib/libgdk-x11-2.0.so.0 (0x40467000)
libatk-1.0.so.0 => /usr/lib/libatk-1.0.so.0 (0x404d7000)
libgdk_pixbuf-2.0.so.0 => /usr/lib/libgdk_pixbuf-2.0.so.0 (0x404ec000)
libpangocairo-1.0.so.0 => /usr/lib/libpangocairo-1.0.so.0 (0x40500000)
libpango-1.0.so.0 => /usr/lib/libpango-1.0.so.0 (0x4050a000)
libcairo.so.2 => /usr/lib/libcairo.so.2 (0x40545000)
libgobject-2.0.so.0 => /usr/lib/libgobject-2.0.so.0 (0x405b9000)
libgmodule-2.0.so.0 => /usr/lib/libgmodule-2.0.so.0 (0x405f1000)
libdl.so.2 => /lib/libdl.so.2 (0x405f5000)
libglib-2.0.so.0 => /usr/lib/libglib-2.0.so.0 (0x405fa000)
libSM.so.6 => /usr/X11R6/lib/libSM.so.6 (0x406b4000)
libICE.so.6 => /usr/X11R6/lib/libICE.so.6 (0x406bc000)
libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x406d3000)
libm.so.6 => /lib/libm.so.6 (0x4079e000)
libfribidi.so.0 => /usr/lib/libfribidi.so.0 (0x407c1000)
libpng12.so.0 => /usr/lib/libpng12.so.0 (0x407d1000)
libpopt.so.0 => /usr/lib/libpopt.so.0 (0x40802000)
libXft.so.2 => /usr/X11R6/lib/libXft.so.2 (0x4080a000)
libfreetype.so.6 => /usr/lib/libfreetype.so.6 (0x4081b000)
libXrender.so.1 => /usr/X11R6/lib/libXrender.so.1 (0x4088a000)
libfontconfig.so.1 => /usr/lib/libfontconfig.so.1 (0x40892000)
libgthread-2.0.so.0 => /usr/lib/libgthread-2.0.so.0 (0x408b8000)
librt.so.1 => /lib/librt.so.1 (0x408bc000)
libstdc++.so.6 => /usr/lib/libstdc++.so.6 (0x408cf000)
libgcc_s.so.1 => /usr/lib/libgcc_s.so.1 (0x4099d000)
libc.so.6 => /lib/libc.so.6 (0x409a6000)
libpangoxft-1.0.so.0 => /usr/lib/libpangoxft-1.0.so.0 (0x40ac3000)
libpangox-1.0.so.0 => /usr/lib/libpangox-1.0.so.0 (0x40acb000)
/lib/ld-linux.so.2 (0x40000000)
libXrandr.so.2 => /usr/X11R6/lib/libXrandr.so.2 (0x40ad6000)
libXi.so.6 => /usr/X11R6/lib/libXi.so.6 (0x40ada000)
libXinerama.so.1 => /usr/X11R6/lib/libXinerama.so.1 (0x40ae2000)
libXext.so.6 => /usr/X11R6/lib/libXext.so.6 (0x40ae5000)
libpangoft2-1.0.so.0 => /usr/lib/libpangoft2-1.0.so.0 (0x40af4000)
libexpat.so.0 => /usr/X11R6/lib/libexpat.so.0 (0x40b1c000)

X Window System: X.org (3)

X.Org

There is no X Window present in system. I renamed all folders.
compile package and install:
12.1 ver Slackware source
d/pkg-config
install it
x/x11
build proto

installpkg *

-rw-r--r-- 1 root root 1824 2019-09-14 03:48 bigreqsproto-1.0.2-noarch-1.tgz
-rw-r--r-- 1 root root 7220 2019-09-14 03:49 compositeproto-0.4-noarch-1.tgz
-rw-r--r-- 1 root root 5481 2019-09-14 03:49 damageproto-1.1.0-noarch-1.tgz
-rw-r--r-- 1 root root 4390 2019-09-14 03:49 dmxproto-2.2.2-noarch-1.tgz
-rw-r--r-- 1 root root 2462 2019-09-14 03:50 evieext-1.0.2-noarch-1.tgz
-rw-r--r-- 1 root root 3727 2019-09-14 03:50 fixesproto-4.0-noarch-1.tgz
-rw-r--r-- 1 root root 2802 2019-09-14 03:50 fontcacheproto-0.1.2-noarch-1.tgz
-rw-r--r-- 1 root root 10074 2019-09-14 03:51 fontsproto-2.0.2-noarch-1.tgz
-rw-r--r-- 1 root root 21378 2019-09-14 03:51 glproto-1.4.9-noarch-1.tgz
-rw-r--r-- 1 root root 13646 2019-09-14 03:52 inputproto-1.4.3-noarch-1.tgz
-rw-r--r-- 1 root root 24512 2019-09-14 03:52 kbproto-1.0.3-noarch-1.tgz
-rw-r--r-- 1 root root 8715 2019-09-14 03:52 printproto-1.0.4-noarch-1.tgz
-rw-r--r-- 1 root root 19869 2019-09-14 03:53 randrproto-1.2.1-noarch-1.tgz
-rw-r--r-- 1 root root 4127 2019-09-14 03:53 recordproto-1.13.2-noarch-1.tgz
-rw-r--r-- 1 root root 16887 2019-09-14 03:54 renderproto-0.9.3-noarch-1.tgz
-rw-r--r-- 1 root root 1470 2019-09-14 03:54 resourceproto-1.0.2-noarch-1.tgz
-rw-r--r-- 1 root root 3505 2019-09-14 03:54 scrnsaverproto-1.1.0-noarch-1.tgz
-rw-r--r-- 1 root root 13937 2019-09-14 03:55 trapproto-3.4.3-noarch-1.tgz
-rw-r--r-- 1 root root 7535 2019-09-14 03:55 videoproto-2.2.2-noarch-1.tgz
-rw-r--r-- 1 root root 1968 2019-09-14 03:55 xcmiscproto-1.1.2-noarch-1.tgz
-rw-r--r-- 1 root root 38006 2019-09-14 03:56 xextproto-7.0.2-noarch-1.tgz
-rw-r--r-- 1 root root 1987 2019-09-14 03:56 xf86bigfontproto-1.1.2-noarch-1.tgz
-rw-r--r-- 1 root root 4617 2019-09-14 03:57 xf86dgaproto-2.0.3-noarch-1.tgz
-rw-r--r-- 1 root root 7824 2019-09-14 03:57 xf86driproto-2.0.3-noarch-1.tgz
-rw-r--r-- 1 root root 2981 2019-09-14 03:57 xf86miscproto-0.9.2-noarch-1.tgz
-rw-r--r-- 1 root root 2186 2019-09-14 03:58 xf86rushproto-1.1.2-noarch-1.tgz
-rw-r--r-- 1 root root 4659 2019-09-14 03:58 xf86vidmodeproto-2.2.2-noarch-1.tgz
-rw-r--r-- 1 root root 3333 2019-09-14 03:58 xineramaproto-1.1.2-noarch-1.tgz
-rw-r--r-- 1 root root 76632 2019-09-14 04:00 xproto-7.0.12-noarch-1.tgz
-rw-r--r-- 1 root root 2077 2019-09-14 04:01 xproxymanagementprotocol-1.0.2-noarch-1.tgz

to build in data you need:
./x11.Build app xkbcomp

No package 'x11' found
No package 'xkbfile' found

Skip that for now

Start bulding ./buld utils

install them:
-rw-r--r-- 1 root root 3201 2019-09-14 05:02 gccmakedep-1.0.2-noarch-1.tgz
-rw-r--r-- 1 root root 28211 2019-09-14 05:04 imake-1.0.2-i486-1.tgz
-rw-r--r-- 1 root root 6667 2019-09-14 05:05 lndir-1.0.1-i486-1.tgz
-rw-r--r-- 1 root root 17403 2019-09-14 05:07 makedepend-1.0.1-i486-1.tgz
-rw-r--r-- 1 root root 5665 2019-09-14 05:08 util-macros-1.1.6-noarch-1.tgz
-rw-r--r-- 1 root root 227374 2019-09-14 05:08 xorg-cf-files-1.0.2-noarch-1.tgz

Next,

Start bulding ./buld xbc

istall

-rw-r--r-- 1 root root 33601 2019-09-14 05:27 xcb-proto-1.0-noarch-1.tgz

configure: error: Package requirements (xau pthread-stubs) were not met:
No package 'xau' foundNo package 'pthread-stubs' found

Start bulding ./buld xserver

pixman missing

build lib pixman

memory fail, add 16MB swap. build again.fail.32 MB,

make spawns 7 sh builds for cc1, no wonder that it failed.

whay? changed build script to not include -j 7 option. :D

fails /usr/bin/ld: cannot find -lgtk-x11-2.0

ffs lets buld gtk and gtk2. at the start fail.

ok.

lets do

libXau

xtrans

make lib libpthread

xcb -> still prbolems->sh: dot: command not found when building docs ->but we have lib

make lib libX11 "-O2"

X11 will be built with the following settings:

Loadable i18n module support: no

Loadable xcursor library support: yes

Use XCB: yes

Threading support: yes

Use Threads safe API: yes

Threads stubs in libX11: no

XCMS: yes

Internationalization support: yes

XF86BigFont support: yes

XKB support: yes

XLOCALEDIR environment variable support: yes

Manual pages suffix: none

Compose table cache enabled: yes

make lib libX11 "-Os"

make lib libX11 "-Os.Min"

disable XF86BigFont, ipv6,man pages

X11 will be built with the following settings:

Loadable i18n module support: no

Loadable xcursor library support: yes

Use XCB: yes

Threading support: yes

Use Threads safe API: yes

Threads stubs in libX11: no

XCMS: yes

Internationalization support: yes

XF86BigFont support: no

XKB support: yes

XLOCALEDIR environment variable support: yes

Manual pages suffix: none

Compose table cache enabled: yes

build lib libXext

XEXT not found. hmmm.

export PKG_CONFIG_PATH=/usr/lib/pkgconfig/:$PKG_CONFIG_PATH

export PKG_CONFIG=/usr/bin/

and build again., oh well, libXdmcp was not built and pkg config listed it as missing,

pkg-config --exists --print-errors "xproto x11 xextproto xau"

it gives errors. after build and install its ok.

rebuild libX11, then libXext

Use this order:

https://cgit.freedesktop.org/xorg/util/modular/tree/build.sh?h=X11R7.6
    build lib libxtrans +
    build lib libXau +
    build lib libXdmcp +
    build xcb pthread-stubs +
    build xcb libxcb +
    build xcb util +
    build lib libX11 +
    build lib libXext +
    build lib libdmx +//DMX − X Window System DMX (Distributed Multihead X) extension
    build lib libfontenc +
    build lib libFS +//X Font Service client library
    build lib libICE +
    build lib libSM +
    build lib libXt +
    build lib libXmu +
    build lib libXpm+
    build lib libXaw +
    build lib libXfixes +
    build lib libXcomposite +
    build lib libXrender +
    build lib libXdamage +
    build lib libXcursor +
    build lib libXfont +
    build lib libXft -> needs fontconfig +
    build lib libXi+
    build lib libXinerama +
    build lib libxkbfile +
    build lib libXrandr +
    build lib libXres +
    build lib libXScrnSaver +
    build lib libXtst +
    build lib libXv +
    build lib libXvMC +
    build lib libXxf86dga libXxf86misc +
    build lib libXxf86vm +
    build lib libpciaccess +
    build pixman "" mmx???? needs manual change. still gtk x11 libs missing

lets build gtk x11

then gtk+2 2.12.9

checking for BASE_DEPENDENCIES... configure: error: Package requirements (glib-2.0 >= 2.13.5    atk >= 1.9.0    pango >= 1.17.3    cairo >= 1.2.0) were not met:


Requested 'glib-2.0 >= 2.13.5' but version of GLib is 2.6.1Requested 'pango >= 1.17.3' but version of Pango is 1.8.0No package 'cairo' found

glib +

pango needs cario so build cario:


cairo will be compiled with the following surface backends:
  image:         yes (always builtin)
  Xlib:          yes
  Xlib Xrender:  yes
  Quartz:        no (disabled, use --enable-quartz to enable)
  XCB:           no (disabled, use --enable-xcb to enable)
  Win32:         no (disabled, use --enable-win32 to enable)
  OS2:           no (disabled, use --enable-os2 to enable)
  PostScript:    yes
  PDF:           yes
  SVG:           yes
  glitz:         no (disabled, use --enable-glitz to enable)
  BeOS:          no (disabled, use --enable-beos to enable)
  DirectFB:      no (disabled, use --enable-directfb to enable)

the following font backends:
  FreeType:      yes
  Win32:         no (disabled, use --enable-win32 to enable)
  ATSUI:         no (disabled, use --enable-atsui to enable)

the following features:
  PNG functions: yes

and the following debug options:
  gcov support:  no
  test surfaces: no
  pdf testing:   no (requires poppler-glib >= 0.4.1)
  svg testing:   no (requires librsvg-2.0 >= 2.15.0)

then pango

now back to gtk+2

needs swap 32bm

lets build x11 lib pixman -> finaly
create new patch to exclude mmx and replace current patch

data needs app's
driver needs xserver +
build driver  +
build app +
build data +
build font +


Install
and still get 'fixed' font missing on startup.

Well. Removed all newly added packages and in XFree86 dir:

make install

Atleast i have it running.

It was total waste of time :D
Until next time you X.Org.

Wednesday, October 9, 2019

Some (re)builds of libs and programs

atk-1.10.0
pango-1.20.0 -> xft.pc was missing, actually was in X11R6 dir. changed configure to exclude xrender (is part of xft.pc)
gtk+2 to include xft. and with -Os compile option.

mc-4.6.0 - v4.6.1+ complains when Ctrl+O:

Cannot open master side of pty: No such file or directory (2)

https://www.dahelp.ru/zametki/mc-cannot-open-master-side-of-pty
Solution probably but will not implement.

Something to do with posix_openpt. Need to change this.

gzip-1.3.12
bzip2-1.0.5
tar-1.16.1
procps-3.2.7

If possible i disable NLS.

Now going for Abiword 2.0.14.

Saturday, October 5, 2019

gtk+2-2.12.9 build

Build packages from source:
~~atk ????~~
libdatrie
libthai 0.1.9, needs datrie
freetype 2.1.5 pango, cario?
cairo-1.4.14
glib2 2.14.0 glib-2.0
pango 1.20.0
gtk+2 needs glib-2.0 2.13.5 atk 1.9.0(need to build it) pango 1.17.3 cairo 1.2.0

Memory: 64MB swap (-j1 needs 32MB swap) +16MB RAM
Build time: 16 hours (-j2 was not sane idea)

Installed gtk+2

Started X Window and runned gtk-demo.
Complained allot about missing fonts. All squares. Also fc-chache complained missing function.
https://bugs.freedesktop.org/show_bug.cgi?id=8281
Oh well. XFree86 has his own freetype and fontconfig. Used by default. Removed them
In font.conf added line <dir>/usr/X11R6/lib/X11/fonts</dir>

fc-cache

And now gtk-demo runs fine.
Not sure about rebuilding all again. In order cairo, pango and gtk+2. :D
There are only some files where gcc -O2 is ok, pixbuf is one. Otherwise i think using -Os would be better, less memory usage by binary.

Now what? GIMP, Firefox ?

Wednesday, October 2, 2019

Speed up compile and rebuilding with ccache-2.4

Rebuilding on this old 486 takes forever sometimes. ccache allows to speed up this process.

Build

From source.

Install

Create links

ln -s ccache /usr/local/bin/gcc
ln -s ccache /usr/local/bin/g++
ln -s ccache /usr/local/bin/cc
ln -s ccache /usr/local/bin/c++

Set cache:

ccache -M 250M

What is first:

type -a gcc

After some re-buildings:

ccache -s

ccache -s
cache directory /root/.ccache
cache hit 339
cache miss 317
called for link 75
compile failed 10
preprocessor error 11
not a C/C++ file 11
autoconf compile/link 313
no input file 58
files in cache 634
cache size 3.2 Mbytes
max cache size 250.0 Mbytes

Kolasait

Lehed